viper cylinders on srx?

snowprophet1

New member
Joined
May 2, 2003
Messages
120
Location
Waterford, Pa.
If I wanted to put viper 700 cylinders on a srx 700, would I only have to machine in the grooves for the o-ring gaskets to use my heads? I know the exhaust valves are different part #'s but are they interchangable, or should each stay with it's own original type cylinder? Exhaust manifolds work? Any other things to worry about? Thanks! :?
 

You could use a head gasket and have the heads cut the thickness of the gasket instead of haveing the cylinders machined for the o rings.
 
The exhaust manifolds will not bolt up and the valevs are NOT interchangable!!!!!! Dont try it. ===SRXSRULE===
 
Here is a cross section of the Viper and SRX cylinders, so you can see why the exhaust manifold won't fit, etc.

eng2_550.jpg
 


Back
Top