t-rav
New member
i had recently bought some hauck tripple for my 600 vmax but cant seem to get my bottom end to run right im running 142.5 mains and 50 pilots 4th clip on needle , stock clutching exept for y-w-y in primary , red in secondary with stock 8dg00 weights i was wondering iff anyone could help me to get on the right track.
methanolhemi
New member
What is wrong with the bottom rpm range?
42.5 pilots stock so going to 50's is awfully big.
How do plugs look?
Needle and mains look good for a starting set-up.
Bottom end rpm is your pilot jets which I think are
way to big. Try 45's
42.5 pilots stock so going to 50's is awfully big.
How do plugs look?
Needle and mains look good for a starting set-up.
Bottom end rpm is your pilot jets which I think are
way to big. Try 45's
Last edited:
t-rav
New member
havent took plugs out to look yet but the bog right out of the hole is very bad but i will try a 45 pilot and maybe go to a 145 main im just wondering iff it has anythig to do with clutching also. thx for your reply i need all the help i can get to figure this out.