Electric start ?????? HHEEELLLLPPPPP!!!

For the life of me i cannot find the plug in from my 02 viper ingnition to go to the relay for my e start install. I can see the 3 wires going into the harness ( black/ red / red-white ) from the main key swithch but cant find a plug in for the e start anywhere. Do i need to take off the airbox to see it? Is it burried in the harness? I can only see the pink, and black wires. I know thats not it, and a white cupler caped off with black and green wires going into it. Pretty sure thats not it also. Where do i look? What does it look like?? Been through the manuals ft and back, check here and cant seem to find what im looking for???? Helllllpppppp meeeeeeee!!!!!!!

TTTT!!!!!!! Where are you harness!!!

Well after 4 long hours of looking and tearing things apart i finally found it tucked in between the rt hand plastic cowl and the back of the foot rest, tied in with a bunch of other wires. I cant believe that no one has done a write up yet for the tech section. I know their is still a lot of guys that want to do this but are afraid to take it on. Electrical stuff can be very confusing to us non electric guys. The tech bulliten for the e start is helpfull but leaves a lot out. I have 3 diff viper paper manuals from the dealer and they were no help either. I will take lots of pics and see how this project turns out and maybe do a write up and submit it for the tech section. During my search all the way back to 2004 it was almost the exact same questions with no answers. Where is the wire, how do a get new couplers for my used kit, how to route the wires, ect...... The answeres were call your dealer, look at the wiring diagram ( which sucks by the way) The ones in my manual are the same. So ill keep you guys posted on my progress as im sure ill have many more questions. If their is any interest in a write up with pics i can maybe do that for submit. Let me know guys!!!