Pics - Vmax 600 Conversion

srxr700

Lifetime VIP Member
Joined
Aug 2, 2010
Messages
266
Age
39
Location
cedar springs, mi
Just thought I'd throw a few pics out there of my completed Vmax project. Dual bulb conversion, new track/bearings, clutches rebuilt, carbs rebuilt, new mono shock skid. Just waiting on Roc's LEDS.
 

Attachments

  • Original Pic.jpg
    Original Pic.jpg
    61.9 KB · Views: 10
  • Guage Pods.jpg
    Guage Pods.jpg
    42.2 KB · Views: 6
  • Head Lights.jpg
    Head Lights.jpg
    41.5 KB · Views: 8
  • Guage Swap.jpg
    Guage Swap.jpg
    65 KB · Views: 8
  • Original Track.jpg
    Original Track.jpg
    47.2 KB · Views: 7
  • New Track.jpg
    New Track.jpg
    64.8 KB · Views: 11
  • NOS windshield.jpg
    NOS windshield.jpg
    69.8 KB · Views: 7
  • Pre Mono skid.jpg
    Pre Mono skid.jpg
    64.6 KB · Views: 10
  • Skid Arrival.jpg
    Skid Arrival.jpg
    65.3 KB · Views: 15
  • Bearing change.jpg
    Bearing change.jpg
    71.4 KB · Views: 12
Last edited:

Did you have to change any wiring to run dual bulb? I see you had a dual gauge pod. And how did the skid go in. Drilling any new holes? Looks good by the way.
 
Last edited:
Did you have to change any wiring to run dual bulb? I see you had a dual gauge pod. And how did the skid go in. Drilling any new holes? Looks good by the way.

I had to splice the factory harness. I bought a newer hood harness with the dual bulb connectors but it didnt work. The connections are different where they plug into the main harness at the hood hinge. Skid went in GREAT. I utilized 03Viperguys template and his write up in the tech section. Big shout out to him. Had to drill about 40 new rivet holes and two new 3/8 bolt holes. Pretty simple and so far I'm happy with how it turned out.
 


Back
Top