Sc10 lll swap into Exciter


got out today for a few hours and this skid works great,sled is a lot funner to ride and there are no downsides to it
image1.jpeg
 
do you know off hand what your running for the primary spring/color and what weights your using? I just mounted a p85 on my 97 vmax 600 and have yet to test run it. I have a blue spring and the MB weights. engages @ 4000 rpm.
 
Thanks,yea she runs pretty good.even without much snow this skid has made the Exciter a ton of fun to ride
 
Sweet exciter! I am swapping an SC10 into my 93 SX and a 1.25 track. I got the track in, but it looks like the lugs are going to hit the front of the tunnel coolers. I was wondering how tall your track is, and if you have noticed any rubbing. I put a studded 1.25 ripsaw into my Phazer II and the studs sometimes scrape when you chop the throttle at speed. Figured a nonstudded would be ok in the exciter, but now not so sure. Thanks
 


Back
Top