sledders
New member
Found loose connection, connected & the oil level light comes on even W/ full tank. Removed sensor test good with multi-meter. Order new sensor, tests good(down position continuity, upside down open circuit.) Suspect ground wire to sensor shorted. Removed wire before connecter to sender and connected directly to ground, light comes on. Now what?
A couple of bucks
VIP Member
Run new wires.
sledders
New member
Basically did that with jumper wires from ign switch and ground from frame.
A couple of bucks
VIP Member
Does light go out when turned upside down?
sledders
New member
No light stays on using spare sender and turned upside down