Results 1 to 3 of 3

Thread: Bender jetting sheet

  1. #1


    Default Bender jetting sheet

    Anyone have a copy of the bender jetting sheet? Picked up a set of used pipes, on the drive home I briefly rolled down my window and the sheet blew out. Can't find it in search.

  2. #2


    Default

    Quote Originally Posted by Squatch View Post
    Anyone have a copy of the bender jetting sheet? Picked up a set of used pipes, on the drive home I briefly rolled down my window and the sheet blew out. Can't find it in search.

    Call Justin at Full Power Performance. He designed them. 716-699-6299

  3. #3
    Senior Member ProStock YooperMike's Avatar
    Join Date
    Feb 2006
    Location
    McMillan, MI
    Posts
    530


    Default

    Search for Turk's Bender setup. There's probably a million and one responses from the late guru. Below are a few...

    150 main jets
    52.5 pilots
    raise needles 1/2
    89L weights with a 2.4 gram rivet
    14.5 mm rollers
    y-s-y primary spring
    52/44 helix
    green secondary spring at 70 wrap


    Home elevation
    52.5 pilots
    150 main jets
    raise needles 1/2
    8cr weights with 4.5 gram rivets in both holes
    54/44 helix with green secondary at 70 wrap.

    high elevation
    62.5 pilots
    137.5 main jets
    drop needles 1/2 from stock
    8cr weights with 3.6 gram inner rivet & .8 gram in tip
    green spring with stock 43 helix at 80 wrap
    20/40ish gearing


    150 mains straight across
    50 pilots
    Raise needles 1/2 right across
    14.5 mm rollers
    89L weights with 2.4 gram rivet
    y-s-y primary spring
    52/44 helix with stock secondary spring at 60 degree wrap.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •