1989 Exciter primary clutch

AJheating

New member
Joined
Oct 15, 2017
Messages
5
Location
OREGON
i have a 1989 Exciter that was given to me last season and needing to get it ready for this season. last year I made long track brackets and put a 136 1.25" track on it. I was doing a quick walk around and noticed the weight was lodged into the roller and roller is flat. I have been searching for parts for the primary clutch but all the pictures do not look like the clutch on my snowmobile. i don't see a part# on clutch. hoping someone can lead me in the direction of finding what i need to repair/rebuild clutch. thanks
 

Attachments

  • 20171015_105543.jpg
    20171015_105543.jpg
    60.9 KB · Views: 4
  • 20171015_105551.jpg
    20171015_105551.jpg
    65.5 KB · Views: 4
  • 20171013_181244.jpg
    20171013_181244.jpg
    82.3 KB · Views: 5

I have a 1989 Exciter that was given to me last season and needing to get it ready for this season.
I was doing a quick walk around and noticed the weight was lodged into the roller and roller is flat.
I have been searching for parts for the primary clutch but all the pictures do not look like the clutch on my snowmobile.
I don't see a part# on clutch.
Hoping someone can lead me in the direction of finding what I need to repair/rebuild clutch.
You have a Comet drive clutch on your sled,
and depending of the diameter of the sheaves it is a Comet 102-C or a Comet 108-C.

Comet.jpg
 
thank you for the reply. i got the clutch off today and torn down. The stationary sheave shaft is worn down really bad. I am thinking of getting a new clutch for it, do i go with a comet replacement or is there a upgrade that can be done? thank you
 


Back
Top