AUX LED lights on front bumper...

sleddineinar

sleddineinar

VIP Member
Joined
Dec 13, 2007
Messages
2,609
Age
59
Location
Ramsey Minnesota, United States
Last edited:

Option 1. I have! just rewire the hi beam switch to 12volts DC then pull of the yellow wire at the hood. Make sure its dc or you will kill the light. no need for relay. would add fuse.

Option 2. if you want to save some time buy this https://tinyurl.com/ycq6drb8 and put this in between the light and the existing headlight plug, if you do it this way you dont need to rewire the switch, if you want me to make you a diagram, tell me which one you want to do.
 
Lil' Mtndreamer said:
Option 1. I have! just rewire the hi beam switch to 12volts DC then pull of the yellow wire at the hood. Make sure its dc or you will kill the light. no need for relay. would add fuse.

Option 2. if you want to save some time buy this https://tinyurl.com/ycq6drb8 and put this in between the light and the existing headlight plug, if you do it this way you dont need to rewire the switch, if you want me to make you a diagram, tell me which one you want to do.
Click to expand...

So are you running the LEDs in addition to the headlights or in place of them?
 
sleddineinar said:
OK, I was also wondering if the electrical systems would handle to extra load of having these and the headlights.
Click to expand...

They should. You need to buy the converter tho since you are running the stock headlights that run on ac, unless you want to put them on a separate switch. let me know.
 
I would love a diagram...But I am thinking adding it to its own switch. I have read that you need a 12v rectifier inline? Thoughts? What wires would you pull off of? I have a 2002 Viper and SXR. I know a lot of people would love a straight forward diagram to help with ease of installation.
 
i dont think so, use a tester to confirm. im not sure on the srx... you could probaly find the brown wire too.
 
You must log in or register to reply here.


Back
Top