Smartcarbs 600, loose hose

zr800m10

New member
Joined
Mar 9, 2018
Messages
5
Location
Jämtlands län [SE-23]
Hello,

I'm assembling a Yamaha Venture 600 -98, a model which has a twin with "smartcarb", I'm wondering where this hose should be attached?
The two smaller ones goes to the back of the carbs where they are attached above the intakes.
The bigger hose goes up to the handlebars where it just stops with an open end, that end feels right since nothing on the handlebars have been touched.

We assembled it and let the hose hang there between the carbs, but there is coming fuel through the hose..

DSC_1841.JPG
DSC_1843.JPG
 

I have a 97 Mtnmax with smart carb and mine has nothing like that. My carbs have 2 vent hoses and 2 fuel lines to the fuel pump. Maybe some better pictures would help.
 
Sorry, I don't have any more pictures and the machine is 50 miles away from where I am.

Looking at the second picture, there is an upper and a lower solenoid visible, maybe that can give some clue as to what the hoses should go?
 


Back
Top