Results 1 to 10 of 10

Thread: need help for my 97 vmax 700 clutching

  1. #1


    Default need help for my 97 vmax 700 clutching

    I am planing to modify my sled this summer in time for winter i have a 97 vmax 700 sx and i am planning on installing cpr triple pipes and reed spacers. looking for either a clutch set up or a clutch kit i can install. i am looking for more of a aggressive trail set up so in other terms i kinda want a best of both worlds kinda deal. so i was thinking a higher engagement spring to get a better take off without sacrificing any top end. i also need to increase my rpm to around 9100 which is required for the pipes i have. also any top end upgrade i can do either from clutching or any other modification would be greatly appreciated. Thanks in advanced.

  2. #2
    Site Admin/CEO MrSled's Avatar
    Join Date
    Apr 2003
    Location
    Weston WI
    Posts
    8,809
    Blog Entries
    3


    Default

    I would have to do some digging but I had those pipes on an SX-R and I think I have a good starting point.
    Castle X Gear and more...

  3. #3


    Default

    Thanks any info you can find would be greatly appreciated.

  4. #4
    Site Admin/CEO MrSled's Avatar
    Join Date
    Apr 2003
    Location
    Weston WI
    Posts
    8,809
    Blog Entries
    3


    Default

    8AY weights inner hole empty and the out hole a 3.1 Gram, P-P-P primary spring, 48/43 Helix with a Silver Secondary spring set at 80 deg.
    Castle X Gear and more...

  5. #5


    Default

    Sweet thanks by any chance do you remember how the sled ran like to rpms and when did it engange? also how was the speed. also do you have any idea where i can find those wieghts
    Thanks again
    Last edited by trevor1203; 07-06-2018 at 03:48 PM.

  6. #6
    Senior Member Open Mod A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    5,472


    Default

    Quote Originally Posted by trevor1203 View Post
    also do you have any idea where i can find those wieghts
    We do have a “WANTED” section of the classifieds. Swaps meets in the fall too.
    Dannyboy

  7. #7
    Site Admin/CEO MrSled's Avatar
    Join Date
    Apr 2003
    Location
    Weston WI
    Posts
    8,809
    Blog Entries
    3


    Default

    Quote Originally Posted by trevor1203 View Post
    Sweet thanks by any chance do you remember how the sled ran like to rpms and when did it engange? also how was the speed. also do you have any idea where i can find those wieghts
    Thanks again
    Direct from Yamaha or as stated in the wanted section.

    Its been a while but I think 3800 engagement and WOT 8350 to 8400.
    Castle X Gear and more...

  8. #8
    Senior Member Open Mod A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    5,472


    Default

    How far up in cheeseville are you Trevor?
    P.M. Dale here ... https://totallyamaha.net/member.php/12512-NickyTech
    He’ll hook you up.
    Last edited by A couple of bucks; 07-16-2018 at 11:26 PM. Reason: Improper sentence
    Dannyboy

  9. #9


    Default

    im located right around the milwaukee area

  10. #10
    Senior Member Open Mod A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    5,472


    Default

    Should Nickytech (aka Dale) not have you needs, there is a quite large swap meet & drag race down at Belvidere in the fall.
    Dannyboy

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •