Results 1 to 3 of 3

Thread: 97 Venture Disc Brake Play on Jack Shaft

  1. #1
    Junior Member Mini
    Join Date
    Mar 2013
    Location
    Kitchener Ontario
    Posts
    14


    Default 97 Venture Disc Brake Play on Jack Shaft

    I just picked up a 97 Venture 600 Twin with reverse and I've noticed that I can move the disc about 3/4" back and forth without the jackshaft turning. Side to side play seems fine. Is this normal? I would expect the disc to be tight on the jackshaft but I'm not sure...Any insight is appreciated.

  2. #2
    Senior Member Open Mod bluewho's Avatar
    Join Date
    Oct 2003
    Location
    Caledon ontario
    Posts
    1,969


    Default

    Common problem with the keyway is worn and now the hub and shaft will show wear as well. Just replacing the keyway and hub will help to get it better.but it will still have some play.
    98 srx 700 doo sc10 3 ported.spi pistons.wide bars. wide frontend.1"preditor.160 golddiggers.
    98 srx 600 doo too
    2001srx700 doo sc10 3
    90 phazor
    90 exciter ported wide frontend adjustable shocks


    THEY SAY HE'S A MONSTER THIS BOY NAMED BLUE
    HE CAN RIDE LIKE A DEMON ON ONE SKI OR TWO

  3. #3
    Junior Member Mini
    Join Date
    Mar 2013
    Location
    Kitchener Ontario
    Posts
    14


    Default

    Thanks Bluewho. It looks like I have to open up the chain case and pull the sprockets to get at that keyway correct?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •