sledrunner
New member
any tips ? The cent
er bearng is also completely gone
er bearng is also completely gone
super1c
Super Moderator
Stuck on the bolts?
i would pull the snap rings (if it has them) and get the wheel out of the way. once it is out of the way you can use a puller on the bearing to remove it or cut them off if needed.
NorthofSixty
Member
If you know someone with a hydraulic press just spray them down with deep creep and they should come off pretty easy.
A couple of bucks
VIP Member
A properly sized socket and a 3# mini maul.
If not, the mating surface is too corroded and wouldn't hold a new bearing securely anyway.
If not, the mating surface is too corroded and wouldn't hold a new bearing securely anyway.
Last edited: