Enticer skid swap

jjmoneysauce

Member
Joined
Jan 13, 2018
Messages
157
Location
Saskatchewan
I am a big fan of Enticer long tracks. I am rebuilding one now, and looking at options for improving the track and skid while it's in the garage. Using 7 tooth drivers, I figure I could probably use a skid anywhere up to 153 without really stressing the drive train too badly. Wondering what kind of skid would have better travel, and fishing for ideas. I would like to use a 1" or 1.25" track.
 

I'm following this. I've been thinking of doing this but on my 79 440 exciter. But I was leaning towards just a 121 and a 1" track. But I'm aiming for a fast trail machine.
 
phazer st skid might work well. still supported by the aftermarket for parts as the are the same as phazer II skid. i put the phazer II skid into a polaris sprint last summer and it has awsome ski pressure and handles really well too.
 
I used a factory 136” skid from a 1998 Polaris rmk with a 136x1.25 track. Polaris skid bolts into stock holes, no drilling. For drivers I used a 7 tooth ski-doo with Barn-o-Parts driver adapters. With 8” ski skins my kids can go anywhere my 174x3” goes. It is amazing!
 

Attachments

  • 7D5F42A9-09E2-4306-A2A2-58189FF2195A.jpeg
    7D5F42A9-09E2-4306-A2A2-58189FF2195A.jpeg
    1 MB · Views: 5
  • 457E7BCC-6F04-4AE2-B758-93CA13EC03CB.jpeg
    457E7BCC-6F04-4AE2-B758-93CA13EC03CB.jpeg
    726.2 KB · Views: 5


Back
Top