Results 1 to 6 of 6

Thread: Phazer with RPC Over Drive

  1. #1
    Junior Member Mini
    Join Date
    Feb 2020
    Location
    Sugar Camp, WI
    Posts
    3


    Default Phazer with RPC Over Drive

    Hello, I just joined this forum today and am humbly asking for help right away. Thank you for the add and I appreciate any help.

    A while ago I bought a Phazer with a Reichard's Performance complete overdrive kit on it with a comet primary and an Arctic Cat secondary. I need to replace the primary spring and I don't know what it's supposed to be. The sled also has a RPC pipe on it and the broken spring in the primary is yellow. I'd even take advice on a spring to try even if it's not the same one. Stock motor, just the pipe and flat slide carbs (carbs were also out of the RPC catalog).

    thank you again!

  2. #2
    Junior Member Mini
    Join Date
    Feb 2020
    Location
    Sugar Camp, WI
    Posts
    3


    Default

    If it helps, it has Arctic Cat A1-482 fly weights, which are 48.5 grams, in it.

    I see there are two Comet Springs that are Yellow. One is 96-224, the other is 100-187.
    Last edited by 250Enticed; 02-14-2020 at 08:39 AM.

  3. #3
    Senior Member Open Mod A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    6,303


    Default

    What year is it?
    Select you year at the bottom of the graph.
    https://totallyamaha.com/snowmobiles...hart/Specs.htm
    Dannyboy

  4. #4
    Junior Member Mini
    Join Date
    Feb 2020
    Location
    Sugar Camp, WI
    Posts
    3


    Default

    Quote Originally Posted by A couple of bucks View Post
    What year is it?
    Select you year at the bottom of the graph.
    https://totallyamaha.com/snowmobiles...hart/Specs.htm
    It's a 1985 or 86 I believe. But I'm not looking for a stock spring though.

  5. #5
    VIP Member Improved dsc577's Avatar
    Join Date
    Jan 2009
    Location
    coon rapids,mn
    Posts
    408


    Default

    You could get a caliper and measure the wire diameter and overall length,any spring that fits a p85 or cat clutch probably will fit the comet to

  6. #6
    Senior Member Open Mod A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    6,303


    Default

    Dannyboy

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •