Results 1 to 7 of 7

Thread: 1999 vt 600 burbles at 5700-6000

  1. #1
    Senior Member Open Mod norwegian's Avatar
    Join Date
    Nov 2004
    Location
    norway
    Posts
    2,692


    Default 1999 vt 600 burbles at 5700-6000

    All stock except for 1 size smaller main jets. Fuel mixture screws me be a wee tad less than 1,5 turns out.
    Where do I start?
    02 SRX 700. 22/38, 50/40, belly pr, MM skis, Mx perf tr rods, TPI valves, temp gauge, HC
    01 MM 700. Reeds mod, hauck gasket, 44/38, tr enh kit, temp gauge, bellypan protector.
    99 VT 600. European edition. Cargo rack & box, tow hitch, 50/38
    97 VT 500.Tempaflow, dupont, belly pan protector, 41, HC, tow hitch.
    97 SX 600. SRX rear HE. Hauck X weights, 39 h, dupont, 22/39, bwb prim spring.


  2. #2
    Senior Member Stock
    Join Date
    Nov 2003
    Location
    Central MN
    Posts
    154


    Default

    More than likely the nozzles are worn. Drop your needles .5 to start

  3. #3


    Default

    I would check the reeds also.
    -------------------------
    1997 Yamaha XTC
    700 Redhead, Mr. Viper ported, CPR pipes, SRX reeds, Heelclickers, Dual bulb, LT Ohlins

    1997 700 SX
    Thinned head gasket, Gutted Airbox, Reed Spacers, Bender Pipes, Viper Shocks, 51/43 helix 89L weights

    2004 Viper S
    SLP pipes, peak performance head,

    2001 SRX 700
    Power Inc. Pipes, Loaded 8DN20's, Hauck Y 51/45

    1997 Mountain Max 700
    Black XTC Hood, Thinned Head Gasket, Gutted Air Box, Reed Stopper Notch, SLP Pipes

  4. #4
    Senior Member Open Mod shaggyzr2's Avatar
    Join Date
    Dec 2011
    Location
    Central Wisconsin
    Posts
    1,949


    Default

    Most of them have the mid range burble, drop your needles a hair

  5. #5
    VIP Member A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    6,361


    Default

    Is this the reed notch/spacer burbling you are referring too?
    Dannyboy

  6. #6
    Senior Member Open Mod norwegian's Avatar
    Join Date
    Nov 2004
    Location
    norway
    Posts
    2,692


    Default

    It didn't burble today, it was between -13f and -15f.
    02 SRX 700. 22/38, 50/40, belly pr, MM skis, Mx perf tr rods, TPI valves, temp gauge, HC
    01 MM 700. Reeds mod, hauck gasket, 44/38, tr enh kit, temp gauge, bellypan protector.
    99 VT 600. European edition. Cargo rack & box, tow hitch, 50/38
    97 VT 500.Tempaflow, dupont, belly pan protector, 41, HC, tow hitch.
    97 SX 600. SRX rear HE. Hauck X weights, 39 h, dupont, 22/39, bwb prim spring.


  7. #7
    VIP Member A couple of bucks's Avatar
    Join Date
    Jan 2009
    Location
    Ogle County Illinois USA
    Posts
    6,361


    Default

    Quote Originally Posted by norwegian View Post
    It didn't burble today, it was between -13f and -15f.
    That tells me it needs to be leaned out a tad. Just like Max and Shaggy mentioned. You yourself just confirmed it though. I'd probably start by dropping the needles a 1/2 spot. Adjust(or not) washer position after you check things out from that run.
    Dannyboy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •