bravo LT track


as that in a 2.52 pitch track x 136" x 15", i would go with a 1" to 1.25" lug track as they are the cheapest to buy new. i put a 1.25" ripsaw on a 97 et410 t/r and it actually picked up speed compared to the stock track. has good trail manners and was a vast improvement in the powder. you can also go single ply if you want to save some weight but i only run 2 ply.
 
I put a ripsaw on a 1990 ET400T/R and brother that one was tight. only has 1/8-1/4" clearance but is working awsome. makes the stock track look like an ashphalt track when running side by side in the powder with its twin.
 


Back
Top