Results 1 to 4 of 4

Thread: Bogie bearings

  1. #1
    Senior Member Stock
    Join Date
    Nov 2018
    Location
    Ovid Michigan
    Posts
    222


    Default Bogie bearings

    Trying to find a way to replace all the bogie wheel bearings in my srx, doing a ground up build and want it right. Cant find much on the web and there are 3 different size bearings in the skid. Maybe a local bearing shop? Or what do u guys think of taking off the covers and spraying them out a repacking them by hand

  2. #2
    Super Moderator Maim's Avatar
    Join Date
    Mar 2004
    Location
    sudbury on. canada
    Posts
    3,596


    Default

    i pull a seal and wash them out with brake cleaner and then repack them using a needle greaser. only change the bearings when they have a bad hitch spinning them without grease. same procedure applies to the speedo bearing and clutch bearing.

    just be aware that the origional wheels on that sled did not have removeable bearings. i keep 6004, 6204, 6205 as well as speedo bearings in stock so i do not have to run for them.
    sleds
    540cc workhorse (vk 540)
    410cc reliable power (enticerII) rx tunnel braces
    500cc mutant margarita mixer (09 phazer rtx/x)
    1000cc of dependability (11 apex xtx)
    1000cc of yamaha excellence ( 16 apex xtx)

    motorcycle's
    00 xt350 mod
    08 wr250x

    atv
    2005 big bear pro

  3. #3
    Senior Member Stock
    Join Date
    Nov 2018
    Location
    Ovid Michigan
    Posts
    222


    Default

    Quote Originally Posted by Maim View Post
    i pull a seal and wash them out with brake cleaner and then repack them using a needle greaser. only change the bearings when they have a bad hitch spinning them without grease. same procedure applies to the speedo bearing and clutch bearing.

    just be aware that the origional wheels on that sled did not have removeable bearings. i keep 6004, 6204, 6205 as well as speedo bearings in stock so i do not have to run for them.
    Alright that's the route I'll take then, that's way cheaper anyways lol thanks a lot

  4. #4
    Senior Member Stock
    Join Date
    Nov 2018
    Location
    Ovid Michigan
    Posts
    222


    1 out of 1 members found this post helpful.

    Default

    I'm just going to change the speedo bearing and the exposed jack shaft bearing about it, both have seen better days.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •