Put my 02 motor in a 04 SX chassis (with DCS) - The motor is solid, starts fine but will backfire and cough and spit.
Removed the tors from the system (shorted it out at the carbs)
Heads up is flashing 6 flashes = DCS sensor error. 02 engine doesn't have DCS sensor in the head, tried to just use the sensor from the 04 head but the same issue occurs - 6 flashes.
Is there a way to remove the DCS activating (Tors like)
Any suggestions would be helpful,
I have checked everything and it all seems to be in order - carbs are clean, no cracks in intake boots (3) power valves are clean, adjusted and working.
Removed the tors from the system (shorted it out at the carbs)
Heads up is flashing 6 flashes = DCS sensor error. 02 engine doesn't have DCS sensor in the head, tried to just use the sensor from the 04 head but the same issue occurs - 6 flashes.
Is there a way to remove the DCS activating (Tors like)
Any suggestions would be helpful,
I have checked everything and it all seems to be in order - carbs are clean, no cracks in intake boots (3) power valves are clean, adjusted and working.