Adjustable Transfer Rods 99' SRX Help

Caperdiesel

New member
Joined
Sep 19, 2019
Messages
5
Location
Nova Scotia
So I bought a set of Lightening Adjustable transfer rods off kijiji. I didn't look at the stock ones until i went to replace them. I'm not sure if i'm missing a piece/not the right ones/or i am just blind. The top of the rod is the same, but the bottom of the stock one has male treads on it with a stopper that treads on. The lightening brand has female treads! I bought them to try and get a little more power to the ground. Any help is appreciated.
 

Attachments

  • IMG_20210124_211623_resized_20210125_075746217.jpg
    IMG_20210124_211623_resized_20210125_075746217.jpg
    58.9 KB · Views: 12
  • IMG_20210124_211629_resized_20210125_075746598.jpg
    IMG_20210124_211629_resized_20210125_075746598.jpg
    50.9 KB · Views: 7
  • IMG_20210124_211749_resized_20210125_075746899.jpg
    IMG_20210124_211749_resized_20210125_075746899.jpg
    57.7 KB · Views: 9
  • IMG_20210125_195256_resized_20210125_075747212.jpg
    IMG_20210125_195256_resized_20210125_075747212.jpg
    34.9 KB · Views: 6

Take the bolt out of the center of the stock rod, then reuse the bottom section with the new red upper section.
 
Sorry, didn't look closely at all your pics the first time.
Your rods were already aftermarket.
Now, with the new red ones, you will place the red part into the part in the 2nd pic on the right.
There will be a white plastic washer that goes on top and below the new rod and then a bolt gets threaded into the bottom of the rod.
But, since you already had aftermarket rods, you will be missing that bolt and plastic washers.
I have the same as your red ones, but in Black. You can kind of get the jist of it here.
 

Attachments

  • blk side 2.jpg
    blk side 2.jpg
    79.8 KB · Views: 8
Last edited:


Back
Top