How do I remove the drive shaft 97 Yamaha vmax600

Tjc702

Member
Joined
Aug 31, 2007
Messages
66
Age
65
Location
Milford PA
I replaced the drive shaft a while ago because the speedo pin bloke in the shaft. It is a four clog shaft. I was able to remove the old one and install the new one without removing the whole chain case. Now I want to replace the track and can't get enough clearance to get the shaft out. I am trying to remove the whole chain case and it won't come out i removed all the bolts and the parking brake and it is still stuck. what am missing?
 

Easiest way I found so you don’t have to disable the parking brake is to just unbolt collar holding jackshaft bearing on the clutch side. Seeing u did that already the rotor ect is frozen to shaft. Either way just unbolt jackshaft bearing and it will slide over far enough to remove driveshaft.
 
I am a dumb ***. I didn't see 2 bolts that were holding the case on. I only found it with a mirror and a flashlight.The case came right out. Thanks for all your help.
 


Back
Top