Here are some quick facts, dimensions and pictures concerning the CurveXS ski:
The "Keel" length is around 30" and at its deepest section, 1.125" from the bottom most point on the ski to the highest point within the variable profile radius.
Width is around 7.0625" by the intake, 7" at the rear alignment flats and 4.825" at its narrowest cross section.
Please keep in mind that the profile is infinitely variable across the ski. The keel exposure and contact area varies from front to back as well.
- Mounting areas are the only planar surfaces on the ski. All others are contour paths.
- The point of inflection along the side cut radius is slightly in front of the spindle, allowing full snow compression to occur under the spindle. This is the least flexible area of the ski and consequently, produces the highest level of energy transfer from the ski into the snow.
- Intake and ejection profiles vary considerably and do not contain mirrored geometry
- This ski is the product of high powered CAD software coupled with directly compatible CAM software. By removing either, this ski and our dream would not be possible.
We are in the process of building the Multimedia section on our website. When it is finished, you may view many detailed ski pictures. For now we will fulfill your individual requests as they come. Thank you for your patience!
Sean S
www.CurveXS.com