Getch
New member
I know this is probable a hammered subject but I have a Bravo short track and just want it to move with a llttle mod as possible.
I know Im gonna have to move the track but why wouldnt a 102" Enticer track and the required 3.29 11 tooth driver work? My guess is the tunnel would require very little work if any since its only gonna move back 5" or so. Enticers are way more common and the driver is square shaft already.
Is there a hex shaft that fits without mod to take standard 2.52 drivers?
This sled is nice other than a rip in the outside edge of the track.
Getch
I know Im gonna have to move the track but why wouldnt a 102" Enticer track and the required 3.29 11 tooth driver work? My guess is the tunnel would require very little work if any since its only gonna move back 5" or so. Enticers are way more common and the driver is square shaft already.
Is there a hex shaft that fits without mod to take standard 2.52 drivers?
This sled is nice other than a rip in the outside edge of the track.
Getch
Cooper0809
New member
I'm kinda havin a hard time understanding what you want to do. You want to move your skid back 5" so you can put on a longer track?