Doing a suspension change out and need to move some brackets within the tunnel on a 2002 Viper and a 1997 Venture.
Can I simply use #10 stainless bolts with nylon lock nuts in place of new rivets, or is this a concern?
I've never been very good with a rivet gun, but I can turn wrenches pretty well.
Can I simply use #10 stainless bolts with nylon lock nuts in place of new rivets, or is this a concern?
I've never been very good with a rivet gun, but I can turn wrenches pretty well.
A couple of bucks
VIP Member
I would,as long there are no clearance issues.Can I simply use #10 stainless bolts with nylon lock nuts in place of new rivets, or is this a concern?
shaggyzr2
Active member
I used stainless bolts on my trailing arm mounts instead of rivets. I've had them on there for about 5 years now with no issues.