Rolled phazer

yukonjack15

New member
Joined
Dec 15, 2015
Messages
1
Location
yukon
Just rolled phazer today small steep hill just rolled upside down was running for 5-8 seconds then I shut it off and put her back on its feet then waited a bit and tried starting NO GO cranks over fine but lots of oil in top end is it messed up or just fouled plugs with oil ? please help
 

Take the plugs out pull it over till all the oil is out put some new plugs in and it should start.
Is it still getting spark? If not start checking your wiring harness and what not
 


Back
Top