Have a question on psi pipes for srv

Srv560

Srv560

New member
Joined
Mar 22, 2015
Messages
216
Location
Lake barrington IL
Hi Guys, been awhile. On my 90 srv I have a psi pipe saying psi racing towards the front of hood.
06565507486a8b0952fb8be762edf2b5.jpg
and narrows down a little at back of pipe. I got anther one of a 87 srv . Says psi at the fan and pull rope area and gets real narrow at the back. Are there two different style pipes.
b63c3dca859ce3a20b250f2902ad0176.jpg
958fc7e6573566e8319d3c19cf250424.jpg
152f3fcc3d5d3b67a7f30f849298acbb.jpg
87. Mine 90 pipe
e2e25c7ff1c8cfd0517858ef601ea410.jpg
1cc4c1bfe6d06ea79d7cbe9440d47c6e.jpg
thanks for any info


Sent from my iPhone using Tapatalk
 
block stamping in the mid section is a older design pipe the other with the script stamping is a newer 2nd gen design pipe or known as the pro pipe
 
Thanks yamaha Nuts . Only difference is the 87 psi pipe , the back section is way smaller in roundness then the psi racing one . Back by the chain case. Is the smaller one better in performance? Or just keep the one I got in there ?. Thanks again.


Sent from my iPhone using Tapatalk
 
pretty much the only difference is in the silencer section the pro pipe has a bigger silencer and exits the stock hole and should sound different due the the double core silencer design i will have to check the set up sheets again but i believe both pipes run at 7-7200 rpms
 
Thanks. The older pipe with the smaller silencer I thought would have more performance, don't no way I am thinking that. The end of the pipe doesn't go out of stock hole like the other one. Looks like it's was cut at a 45 degree


Sent from my iPhone using Tapatalk
 
To yamaha nuts. Took newer pipe out and put older one in. Flange springs to loose. ( pipe had to been shorten ?) doesn't fit in back exit hole in frame , 3 to 4 inches to long. Started it up has a cool sound and some power. Still stv psi pipe with mods you think. Thanks


Sent from my iPhone using Tapatalk
 
nuts is right on. psi racing is newer pipe and design. '' psi '' is older pipe. my experience with psi is '' psi racing '' is the pipe you want. 3:16x (yammie tony)
 
You must log in or register to reply here.


Back
Top