Swdude12
New member
I just picked up a SX-R 700 with 4000 miles on it and unfortunately it has a bent RH Trailing arm. The trailing arms both have ID marks = R on them. Is that correct? Also what is the difference between the R and the M (viper)? The spindle height? I cant use a V right? I am going by what was posted before, as shown below. Thanks...this get a little confusing.
SX/SRX are the same. ID mark = V 7" travel 40.9" ski stance
MM/PZML are the same. ID mark = S 6.7" travel 38.5" ski stance
All 9" 42.1" wide are the same. ID mark = R 9" travel 42.1" ski stance
All Vipers 8DM model are the same. ID mark = M 9" travel 42.1" ski stance
SX/SRX are the same. ID mark = V 7" travel 40.9" ski stance
MM/PZML are the same. ID mark = S 6.7" travel 38.5" ski stance
All 9" 42.1" wide are the same. ID mark = R 9" travel 42.1" ski stance
All Vipers 8DM model are the same. ID mark = M 9" travel 42.1" ski stance
sleddineinar
VIP Member
Yes, use the ones stamped with "R" for your sled.