drew24
New member
I have done quite a bit of research on where to send my crank but most of the stuff I found was fairly old. I need to get my srx crank welded and trued. I left a message at Midwest crank last week and haven't heard anything yet. I checked the runout and the pto is .007 out. I was thinking about trying it but I would rather not mess it up and have to pull the motor back out. I would like to find someone I could trust to get it right. Any suggestions are much appreciated. I will try Midwest crank again tomorrow but I would like to get this sent off soon. Thanks.
find sxr1000 on here, his name is lyle, does good work!
drew24
New member
Thanks a bunch. I sent him a pm.
03viperguy
Moderator
I had midwest crank do my viper crank this spring. fast turnaround, good price, replaced everything for (I think) $450. apparently they did a lot of the 98 srx crank work for the recall back in the day
guy seems to really know his stuff
guy seems to really know his stuff
brethren
New member
CV Tech did mine
Sent from my SGH-I337M using Tapatalk
Sent from my SGH-I337M using Tapatalk
YAMMIEGOD3:16
Active member
call casey hauck. great guy to deal with. 3:16x (yammie tony)
drew24
New member
Thanks for the replies guys. Lyle is going to be doing the work.
he will do a good job for you!