How many miles do people generally give clutch components before they replace them? Specifically the rollers. My SRX rollers are original and they have around 26000 kms on them. The bushings are still tight but I don't know about the outside diameter,as in how much they've wore from new. My calipers aren't exactly high end even though they're digital,and they read all different,but still with that many miles the rollers are bound to be wore.
Sent from my XT1058 using Tapatalk
Sent from my XT1058 using Tapatalk
YAMMIEGOD3:16
Active member
in doubt, replace. 3:16x (yammie tony)
What is the size of the stock Viper roller?I have a set of rollers in my spare parts collection and I can't remember where they come from.I may have taken them out of the replacement clutch I bought last year off a Viper after I noticed my sliding sheave had a radial crack in it.
YAMMIEGOD3:16
Active member
14.5 mm 3:16x (yammie tony)
tcdesignguy
New member
Sorry to piggyback this thread... looking for 14.5mm roller for my 2000 Sxr 700 with bender pipes (middle gasket removed) - is the I.D. the same on my sled as a VIPER? Meaning can I buy stock Viper rollers?
running 51/43 helix fyi
thanks!
running 51/43 helix fyi
thanks!
YAMMIEGOD3:16
Active member
i have a set. drop me a pm. 3:16x (yammie tony)