Easiest way to install the rear suspension?

[Vector88]

Anyone have any tips on a easier way to install the rear suspension? I have found a easy way i the past but can't seem to remember how I did it. I think I put the front bolts in place then went to the rear then to the middle shaft. But I'm thinking I worked my way from front the back in the past. Can't seem to remember what I did. Installing the skid tomorrow and hopefully go in easy lol thanks for any input

 

[Ding]

Each skid is a little different, but generally front first, then rear, then any middle mount if equipped. Some are easier on it's side and some elevated with certain pressure points.

 

[Hammer Down]

Front bolts first. Then rear. Use of a floor jack helps a lot.

 

[Vector88]

Figured it out. The transfer rods backed off made a huge difference. I did mine front to back with the transfer rods backed off by loosening the 14mm bolt at the bottom. Everything fell into place very nicely

 

[Ding]

Sounds like you have a ProAction skid then - yes that makes it easy to do it