billybaru13
New member
I just picked up a AAEN pipe for my 94 Phazer. I read all the forum posts on jetting and went with a 150M and a 110P in the stock butterfly carbs at 100 ft above sea level. I took the sled out and it was wayy to rich @ WOT. My guess is that since it was 52 degrees out when i tried it, it was just to warm. I took the air box off, and it got a bit better, but still pretty blubbery. I went back to stock jets and stock pipe and the sled runs fine.
Thoughts?
Thoughts?
Yamaha Nutz
New member
148.8 mains should clear it up
Stockamj82
New member
Yamaha Nutz can you hel me with 99phazer 500 jetting for Aaen pipe need part numbers or what dealer to call that will understand which mains and pilots to give me without partnumber