dsc577
VIP Member
Nice job!! You will have to let us know how you like it. Now you have to get ride of the ugly yellow wheels.
dsc577
VIP Member
View attachment 63149j
Thanks i will and yea is that the only color they have? Lol
Thanks i will and yea is that the only color they have? Lol
Not sure, but the white looks good.
dsc577
VIP Member
got out today for a few hours and this skid works great,sled is a lot funner to ride and there are no downsides to it
dsc577
VIP Member
Not an upside down pic
bluewho
Active member
Sweet
dsc577
VIP Member
The polaris clutch and skidoo skid get along pretty good
pete72
New member
do you know off hand what your running for the primary spring/color and what weights your using? I just mounted a p85 on my 97 vmax 600 and have yet to test run it. I have a blue spring and the MB weights. engages @ 4000 rpm.
dsc577
VIP Member
10-58s Almond/Gold - secondary red, 45@60
dsc577
VIP Member
dsc577
VIP Member
Looks like shes running great!!
A couple of bucks
VIP Member
She looks great!! Nicely done. 
dsc577
VIP Member
Thanks,yea she runs pretty good.even without much snow this skid has made the Exciter a ton of fun to ride
dsc577
VIP Member
Added a led light for those early morning runs,wont have to wait for the sun to come up now!
Awesome job!! that really works and looks great!!
dsc577
VIP Member
Thanks,changed the color scheme up a little to
Sweet exciter! I am swapping an SC10 into my 93 SX and a 1.25 track. I got the track in, but it looks like the lugs are going to hit the front of the tunnel coolers. I was wondering how tall your track is, and if you have noticed any rubbing. I put a studded 1.25 ripsaw into my Phazer II and the studs sometimes scrape when you chop the throttle at speed. Figured a nonstudded would be ok in the exciter, but now not so sure. Thanks