Anyone ever run a SRX 700 without the power valves installed? Obviously still capping/sealing the PV holes off.....How would it run? I realize it would be down HP but curious if anyone has ever done it and how did the machine perform.
Thanks
Thanks
pete_man26
New member
Not sure about not having them installed but I have heard of guys running them pinned back to be open all the time for a drag setup. You shouldn't be down on power at WOT as they were designed to increase the low end power. I wouldn't recommend trail riding like this.
To seal them though you would have to properly seal it in the cylinder at the point where the PV is at its open position.
To seal them though you would have to properly seal it in the cylinder at the point where the PV is at its open position.
u need to keep the power valve in the hole but bolt them open :-
YAMMIEGOD3:16
Active member
they have been run in open position and i have seen them blocked off . i don,t believe you can just omit them. 3:16x