Hi, just looking for some ideas, going on a trip to the mountains in march and want to raise the seat height on my sons sxr 600 he is over 6 feet and really cramped on this sled, does anyone make a strap on riser.? Just need something tempory for 3.5 days. Though about getting some 4 inch closed cell foam and strapping to seat lol. Any pictures of your homemade seat risers. Can't afford a boss seat this year, to many expenses at moment.
Send a message to Amatosrx, he makes a really sweet seat.
super1c
Super Moderator
https://totallyamaha.com/snowmobiles/aaTECH/ausertech/Viper Seat Riser Redefined.htm
I made a ton of these for my proactions. Worked good and cheap. You can make them as fancy as you want but they do help get your knees out of your chest.
I made a ton of these for my proactions. Worked good and cheap. You can make them as fancy as you want but they do help get your knees out of your chest.
A couple of bucks
VIP Member
Post #93.
https://totallyamaha.net/showthread.php/97649-96-XT6-to-144/page3
I have two aluminum U channels for each side of the RotoPax. Those channels will be riveted to the tunnel. Then turn-locks attach the seat to those channels. And obviously the RotoPax goes in the channels and under the seat.
Nothing done yet as we haven’t had snow for 2 friggin year.
https://totallyamaha.net/showthread.php/97649-96-XT6-to-144/page3
I have two aluminum U channels for each side of the RotoPax. Those channels will be riveted to the tunnel. Then turn-locks attach the seat to those channels. And obviously the RotoPax goes in the channels and under the seat.
Nothing done yet as we haven’t had snow for 2 friggin year.