Powerinc700
New member
I have a 97 sx 700 and a set of power inc end dump pipes but cant seem to find much info on setting them up, there is a page ive seen for the center dumps but not for the end dumps...... I have a set of reed spacers also and looking for a recipe to set this thing up. anyone have some jetting/clutching info on these?
A couple of bucks
VIP Member
I am not sure wether these are end or center. It was on the Tech page.
47/41 Helix, 89-L weights w/4.5g rivets, stock springs, and stock gearing. Jetting: 145 mains.
47/41 Helix, 89-L weights w/4.5g rivets, stock springs, and stock gearing. Jetting: 145 mains.