Hey all,
So I got this thought in my head that I want to monitor the cylinder temps when I get my sled all back together. Just thinking my sled is triple but single exhaust, I could measure there but that doesn't give me individual cylinders. Then I thought I'll put a themocouple under each spark plugs like in the old days but not sure if that will give me an accurate reading due to the watercooled motor. Any thoughts or suggestions??
So I got this thought in my head that I want to monitor the cylinder temps when I get my sled all back together. Just thinking my sled is triple but single exhaust, I could measure there but that doesn't give me individual cylinders. Then I thought I'll put a themocouple under each spark plugs like in the old days but not sure if that will give me an accurate reading due to the watercooled motor. Any thoughts or suggestions??
A couple of bucks
VIP Member
You can put EGTs on a 3x manifold. Here is a Digitron on my two into one manifold.
Post #59.
https://totallyamaha.net/showthread.php/97649-96-XT6-to-144/page2
Post #59.
https://totallyamaha.net/showthread.php/97649-96-XT6-to-144/page2
I'm a little late to the party but maybe you're still out there. Unless I am misunderstanding you would be reading cyl head temp instead of egt. Still something for tuning an air cooled motor not so good for water cooled. As stated above you can a triple get just ain't gonna be cheap. I have used avenger, digitron, and one other brand I can't remember. They all got the job done.