2” split exhaust rings

[MURDER YAMAHA]

Have a set of bender pipes on my SX.
there are (2) 2” sealing rings on each manifold.
need a set of 6 as mine are wore out.

have had no luck finding any.
not even sure what they are called to be able to do a proper search for them.
need help!

 

[norwegian]

Can you take pics of them?

 

[Simonsweden]

Aaen use the same type of sealing rings, dont know if they are the same
diameter. I am in need of one seal ring to.

 

[A couple of bucks]

If it's similar in design to a piston ring, PSI used them too.

 

[norwegian]

If it's similar to a piston ring, can you use stock rings that are used in the twin cylinder exhausts?

 

[Simonsweden]

The rings measures 53mm outside dia and 2,4mm thick

 

[A couple of bucks]

I have had to make them before too.
1. I took the compressor to the chop saw and blew off every bit of sawdust. Then changed the blade out for a metal cut-off blade.
2. I went and found the correct sized pipe.
3. Cut a 1/4"(ish) sized relief the length of the pipe.
4. Then throw it in the saw and slice off the proper thickness.

 

[Simonsweden]

It is a set of bender flanges for sale on ebay now.