New modern reed valve. SS-440

Ski-B

Member
Joined
Jan 24, 2022
Messages
95
Age
60
Location
Canada
After a ton of research. I finally found a good vforce reed for the smaller ss-440 cylinders. This vforce reed is from a 1997-2000 CR-125. The bolt pattern is identical to the SS and the reed drops right in. With the stuffer removed the volume matches the intake manifold very nice.

Hoping this is useful information for anyone modifying the old vintage SS-440 or even early SRV cylinders. Good luck. Have a great day.
 
Last edited:

20230210_081342.png
 

Attachments

  • 20230210_081311.jpg
    20230210_081311.jpg
    188.2 KB · Views: 7
  • 20230210_081227.jpg
    20230210_081227.jpg
    202.4 KB · Views: 7
No I have not. I only ordered one as a trial. At $250.00 Canadian it was going to be an expensive experiment if it did not fit. LoL.
 
I took sometime and installed the single V-force reed... along with one stock reed in the other cylinder. To my surprise the sled run really well. No issues.
 


Back
Top