DataPak
New member
- Joined
- Feb 14, 2023
- Messages
- 2
Hey guys I've been scouring the internet but coming up shorthanded and hoping there's some people on here that can help. I understand that swapping M8 skids is/used to be a popular mod in the Yamaha world. I have a 06 RMK 700 that the previous owner swapped in a 07 m8 153" skid into, but he used the original Polaris mounting holes so the suspension geometry is all buggered up. I'm looking for the measurements for the mounting locations for the M8 skid and hoping someone here has this info as it used to be a popular swap. Thanks.
you might want to also try on https://polarisstarpower.com/home/
I have an m7 153 sitting here. I think its an 07. I can get some measures if you still need them
DataPak
New member
- Joined
- Feb 14, 2023
- Messages
- 2
That would be awesome!!
Was the 06 rmk iq chassis running the 1 1/16" drive shaft or does it have the odd splined shaft for the 2.86 pitch? Just trying to picture the best way to give you a measure from center of drive shaft.