Out of track adjustment.

[dadawg]

03 Viper ER, put on a 1.25" ripsaw track with studs. Dropped to 8 tooth drivers. Now I'm out of adjustment. Has anybody had this issue? If so what was your solution. I've heard of people going to larger guide wheels in the rear. Any info on this would be greatly appreciated!

 

[Maim]

lots of guys would put the old srx 440 wheel on the back for less rolling resistance. they are 7.5" wheels instead of the stock 7" wheels.

 

[dadawg]

Thanks for your input!

 

[super1c]

Should be able to just tighten track. Ran that same set up without any changes.