archer
Member
'83 SS440 w Keihin carb. Got it starting on the 1st pull after tank drain and carb clean but I dont remember what recommended setting is for the fuel(air?) screw is. 1.5 turns?
74Nitro
VIP Member
Get the engine up to operating temperature, then adjust while idling.'83 SS440 w Keihin carb. Got it starting on the 1st pull after tank drain and carb clean but I dont remember what recommended setting is for the fuel(air?) screw is. 1.5 turns?
1.5 is a good starting point.
archer
Member
When warm, seems to be idling around 1k. Close enough? Thx Nitro.