bensx700
New member
- Joined
- Sep 19, 2022
- Messages
- 3
looking for dimension 70's sheave gauge tool
RON HYDRAULIC YAM
Member
too bad they don't give the distance between the sheaves .. Maybe a laser level
and use a 5mm bolt to use as a feeler gauge against the driven sheave ?
Pretty good looking sled and expect you don't intend to do a lot of
radar runs with it . Expect a nice piece of square stock almn with
some nuts taped on to set the gap of 4.5 to 6.0 mm would also
do a 95% job.
Ron
and use a 5mm bolt to use as a feeler gauge against the driven sheave ?
Pretty good looking sled and expect you don't intend to do a lot of
radar runs with it . Expect a nice piece of square stock almn with
some nuts taped on to set the gap of 4.5 to 6.0 mm would also
do a 95% job.
Ron