ViperSbite
New member
03viperguy
Moderator
sweet! what mods?? I am bone stock and can get around 112-115 max!
ViperSbite
New member
Thanks!
I'm running SLP ceramic coated pipes,Tempaflow, the Yammie torque limiter and a Goodwin installed clutch kit (they use Polaris weights). I did get it to 132 that day as well, but I am over-revving just a bit... I am not sure what other piped Vipers run, but I imagine I lose some top end with the Ripsaw.
I have 800 miles on the setup and couldn't be happier - no problems besides the lack of snow!
The next mod I'm considering is to either stud the Ripsaw or run a 9830...
Any pros/cons would be appreciated!
I'm running SLP ceramic coated pipes,Tempaflow, the Yammie torque limiter and a Goodwin installed clutch kit (they use Polaris weights). I did get it to 132 that day as well, but I am over-revving just a bit... I am not sure what other piped Vipers run, but I imagine I lose some top end with the Ripsaw.
I have 800 miles on the setup and couldn't be happier - no problems besides the lack of snow!
The next mod I'm considering is to either stud the Ripsaw or run a 9830...
Any pros/cons would be appreciated!
yamaholic22
Active member
those are some real good top speed numbers, must be dialed in nicely