redsnake3
New member
i need some suggestions on what products are the best.
what is the best aftermarket products for my viper.
currently i have
cpr hauck triple pipes and triple silencers
cpr head mod
v-force 3's
Heel clicker clutch kit with red and silver spring
52/36 helix from RPC
following gears 20,21,22,38,40.
i have a ripsaw track but am going to get a 1 1/2" or 1 3/4" track.
i am thinking of doing porting but dont know who has the best templates
i need a secondary clutch setup
primary clutch setup
porting template
track suggestions (brands and heights)
we race 660' groomed and usually lots of snow so i dont need studs
thanks for the help.
what is the best aftermarket products for my viper.
currently i have
cpr hauck triple pipes and triple silencers
cpr head mod
v-force 3's
Heel clicker clutch kit with red and silver spring
52/36 helix from RPC
following gears 20,21,22,38,40.
i have a ripsaw track but am going to get a 1 1/2" or 1 3/4" track.
i am thinking of doing porting but dont know who has the best templates
i need a secondary clutch setup
primary clutch setup
porting template
track suggestions (brands and heights)
we race 660' groomed and usually lots of snow so i dont need studs
thanks for the help.
I would go with a 51/43 helix and your silver spring set at 70 for 660 i would try the 21/40. as far as the porting goes send your top end in to mrviper700 he will get you a guaranteed 10-12HP pump gas port job on your viper.. send him a pm if interested. not sure what weights to run though sounds like your going to have a very fast sled. i hope this helps a little, tom
redsnake3
New member
yeah thanks for the suggestions i need everything i can get theres stiff comp. out here now.
I would go with super tips or hh's.I would get ahold of Jeff simon or aulmer racing.
redsnake3
New member
any suggestions on secondaries. im gonna get an aftermarket one i think.
yamaholic22
Active member
Advant-edge R3 if you're going aftermarket
auji700triple
New member
thats on the way for me