Does anyone on here own a machine shop

[maxdlx]

I need someone to maybe make me some brakets. I want to take 1/2 inch aluminum flat that is 4 inches by 8 inches. I want to mill down both ends on oppisite sides by 1/4 inch, leaving 1.5 inches in the middle at 1/2 inch. Thus making rear drop brakets that I don't have to cut my shaft and spacers. If you can help give a shout. Thanks Maxdlx

 

[Dave_Vmax600]

i know someone who can do that for you but its going to cost some cash let me know if your interested.....and ill talk to my buddy.

 

[maxdlx]

Do you understand what I want. If you can get a price from him that would be great. thanks Maxdlx


The more I think about it1/4 inch milled to 1/8 inch would be good enough. Let me know. thanks Paul

 

[Dave_Vmax600]

alright ill talk to him tomorrow and find out the prices

 

[SRXSRULE]

Paul, you provide the material and give me a written out plan on what you want done and I will get it done for free. If you cant get the material, I can but then there will be a cost involved. let me know. ===SRXSRULE===

 

[n2oiroc]

if these would work on a viper i would be interested. let me know a price if you want to make a couple sets.

 

[BETHEVIPER]

if you want to drop down use the rx1 style, very strong, i have the rx shaft to make it all the correct width for 25 shipped, dont have brackets though.

 

[n2oiroc]

if maxdlx doesnt want it, then ill take it.

 

[maxdlx]

Scott you can sell the rx-1 shaft to n2oiroc, I am going to try and make the brakets I want. Thanks Paul

 

[2ooosrx]

MAX....Give me a call I will help you out.847-344-1457
Bruce

 

[maxdlx]

I'll call tomorow. Thanks Paul

 

[2ooosrx]

Call after lunch, I will be out until then.
Bruce

 

[2ooosrx]

Paul send me your address again UPS can not find the one you gave me.
Bruce

 

[maxdlx]

It is
Harmel Impl
2224 Hwy 130
Bennett, Iowa 52721

We get ups there all the time. Thanks Paul

 

[Dave_Vmax600]

hey sorry i didnt reply back sooner. my buddy said its not worth going through him becuase of shipping.

 

[maxdlx]

Thats fine, I think Bruce has the answer to my dreams. LOL Maxdlx

 

[2ooosrx]

I will ship Friday..... NO cost, put in a good word.
Bruce

 

[n2oiroc]

any pics of the final product?

 

[maxdlx]

I will post pics of them when I get them, and when they are installed. I am going to have to do a little grinding on them myself, forgot about the running board cooler, Opps. So I will post pics of how they looked before and after I mess with them. Maxdlx

 

[2ooosrx]

Paul......Took care of your Opps, it's on it way.
Bruce