mountainman
New member
I have a 1998 Vmax xtc 700, so stoked(just bought it sunday) anyways, wut would u guys recommend as far as extending it to a 144 or maybe even 151? give me some advice! and will dropping and rolling the chaincase allow more track clearance at least for a 2''paddle?
grapeape
New member
D and R will allow a 2" track to fit and 8 tooth drivers will do the same, but it will be kinda tight.
mountainman
New member
o ok sweet ill do one er the other. thx fer the advice.
did a 97 from 121 to 141, hartman kit with 8 tooth drivers. works awesome.
mountainman
New member
how much was the whole kit including track and drivers?
dont remember for sure, $300 something. maybe closer to $400. did this one after a mountain performance. hartmans stuff fit to a "t", mtn perf stuff we had to "alter to fit", so to speak. i am speaking from experience, i have no ties to either supplier, but hartmans stuff works. hope this helps.
mountainman
New member
thx fer the advice and ill look into it and let ya know how it turns out.