I have a Bravo short track with one torn out window on the outside. (torn edge at window) Anyone ever try cutting and patching in a piece of track? I figure this is a low hp application and studs are bolted through all the time why not cut an old track with a 1 1/2 inch wide 8 or 10 inch piece and bolt it on the out side?? It drives ok now but Im afraid it might break. Track is typical older yamaha worn but not showing rods yet. Idea?? comments??
Thanks
Tony
Thanks
Tony
The best thing to do, if you don't plan on buying a new track, is to contact Carroll Tech. They specialize in repairing tracks and warranty their work. Go to www.carrolltech.com.