Brad
New member
- Joined
- May 23, 2003
- Messages
- 403
The jetting stager is different between (98-99) and (00-02)
The fist two years put the bigger jet in #3 cylinder
The last three years put the bigger jet in #1 cylinder
Benders instructions say 150-150-152.5. Thats fine for (98-99)
but for (00-02) should be152.5-150-150
witch is only good for 0 degrees F or minus 17 degrees C
The fist two years put the bigger jet in #3 cylinder
The last three years put the bigger jet in #1 cylinder
Benders instructions say 150-150-152.5. Thats fine for (98-99)
but for (00-02) should be152.5-150-150
witch is only good for 0 degrees F or minus 17 degrees C