SRX base gasket on a viper?

[mountain_mod_viper]

I've read a few posts where people have said to use the srx base gasket on the viper. I haven't been able to find any posts that explain the benefits of this. I'm currently doing a 780 kit on my viper and wonder if I the srx base gasket would give me better cooling.
Can anyone fill me in?

Thanks,
Ryan

 

[Srxspec]

The SRX base gasket will give you better cooling because the cooling holes are larger and will allow more water to pass through the middle and mag cylinders.

 

[Mtnviper]

Spec, are both gaskets the same thickness?

 

[n2oiroc]

i remember a post a long time ago about the gaskets being a bad idea. something about the smaller holes on the viper gaskets evening flow out, with the srx gaskets on a viper it cools one cylinder a lot more than the others. i dont know much about it either way, but ill try to find the post for some good reading.

 

[SRXMAGIC]

Yes.......the Same

 

[BETHEVIPER]

here is a picture, the viper is lower. on both the pto is to the left.

 

[800]

PTO is to the left?