SRX Clutch roller question

[x2ryder]

I bought some 14.5mm rollers last spring that I was going to use in my 2002 stock srx. Correct me if I'm wrong but doesn't smaller rollers give you more belt pressure? Anyway now I'm making a 780 bigbore out of it and have these rollers and was wondering if they are still gonna help me with 780 clutching? I have all the stuff I need for the 780 clutching but I have this set of rollers sitting here and was wondering if I should just stick with the stock 15mm rollers or put in the 14.5mm rollers? I have grass 500ft setup and also a trail setup. Any help would be great. Otherwise anyone want to buy a set of 14.5mm rollers? Thanks

 

[redsnake3]

the smaller rollers will put the sled into engagement at less rpm's, i dont think it will change anything else.

 

[pro116]

they work well on some sleds but on the srx's I would stay with the stock rollers.Who's 780.I'm in the processs of buying one also.

 

[x2ryder]

It started out as an Aaen 780. But they didn't do anything to the boost ports and all 3 exhaust ports were different. So here in Moline Illinois there is a guy named Jerry Jackson here at Jackson Performance Center that is going to do the boost ports and change the port timing and make all 3 exhaust ports the same. He does beautiful work. He can make anything run Awsome. He has done a cat 1004 for me and ported my stock srx 700 cylinders.